Outer Limits 4x4 Board

Sized up a set today, they should go on without too much effort

kewl You good at changing cv's

Pics too that'll look awesome

not too good at it, but i imagine i will be

will be going around to a mates place soon to borrow his plasma cutter

anyone know where i can get some new 33 MT/R's at a good price?

pics man (when you do get them.)

that'd be sweet with 33"s, will they be 12.5" wide as well?

i could only fit 32"s with some rubbing when the sus. cycles. with 33"s, i'd probably only be able to drive in a straight line.

let us know how it goes.

dont be soft, go 35's

btw, i hope you have a bigass hammer to massage your firewall with

well with the massive offset rims i have (ex overkill buggy) i`m thinking 12.5's might work

i was thinking 33x10.5's but as far as can see only BFG make a muddy in that size :(

massive offset only adds to your problems, like it has done with mine (and mine are a less offset than the buggy ones) , cause your scrub radius (i think thats what its called) will be huge

Nothing a plasma cutter and a BFH wont fix

Gonzo wrote:well with the massive offset rims i have (ex overkill buggy) i`m thinking 12.5's might work

i was thinking 33x10.5's but as far as can see only BFG make a muddy in that size :(

Cough cough

My swampers measure just over 33.5 inches tall and 10.5 inches wide

too grippy

while i'm still on IFS i cant have that much grip

Gonzo wrote:too grippy

while i'm still on IFS i cant have that much grip

Simple, just dont air em down

Gonzo wrote:well with the massive offset rims i have (ex overkill buggy) i`m thinking 12.5's might work

i was thinking 33x10.5's but as far as can see only BFG make a muddy in that size :(

Well... Kelly Springfield so one and there's some 9.5"s as well. Simex do a 32x9.5 thats gonna be similar.

Have you cosnidered 7.5R16? I've got some cool pics of one of them here thats over 32"

I've already bought my 15x8's

Cool

I just bought some 33x10.5 r16s yesterday. They look mad, only cost me $100 second hand for all of them off a mate, decent condition. Finding the 16" rims is the hard thing. I found some old jeep 16"s that fit but were only 5.5" wide. Anyone know which jeep rims came in 16"? I know the cj rims fit but dont know if they came in 16". Don't know much about jeeps. I know I can't buy 16x8s for a sierra, they don't make them and custom ones cost too much. Does anyone here run 16" rims?

kowntafit wrote:I just bought some 33x10.5 r16s yesterday. They look mad, only cost me $100 second hand for all of them off a mate, decent condition. Finding the 16" rims is the hard thing. I found some old jeep 16"s that fit but were only 5.5" wide. Anyone know which jeep rims came in 16"? I know the cj rims fit but dont know if they came in 16". Don't know much about jeeps. I know I can't buy 16x8s for a sierra, they don't make them and custom ones cost too much. Does anyone here run 16" rims?

I think 7's are enough for 10.5's they are available new I think? as there is others using same pattern, christover

don't bash the drivers side of the firewall back too far, you will loose throttle travel. Not that i had this problem, i just heard about it from a guy who knows a guy.

christover1 wrote:

kowntafit wrote:I just bought some 33x10.5 r16s yesterday. They look mad, only cost me $100 second hand for all of them off a mate, decent condition. Finding the 16" rims is the hard thing. I found some old jeep 16"s that fit but were only 5.5" wide. Anyone know which jeep rims came in 16"? I know the cj rims fit but dont know if they came in 16". Don't know much about jeeps. I know I can't buy 16x8s for a sierra, they don't make them and custom ones cost too much. Does anyone here run 16" rims?

I think 7's are enough for 10.5's they are available new I think? as there is others using same pattern, christover

I tried to get a set of 31x10.5s on my 15x7s and the guys at the tyre shop wouldn't do it. They said the rims were too small. I have heard people fit them regardless but I think it is illegal, but then again so is running 33"s.

kowntafit wrote:
I just bought some 33x10.5 r16s yesterday. They look mad, only cost me $100 second hand for all of them off a mate, decent condition. Finding the 16" rims is the hard thing. I found some old jeep 16"s that fit but were only 5.5" wide. Anyone know which jeep rims came in 16"? I know the cj rims fit but dont know if they came in 16". Don't know much about jeeps. I know I can't buy 16x8s for a sierra, they don't make them and custom ones cost too much. Does anyone here run 16" rims?

Get a set of standard Grand Vitara steelies or alloys 16x7's. Are you in sydney?? I know of a set that was available..

In Perth. I tried to get 16x8 grand vitara rims and I can't find any, not even new sunraisers, I can't afford new alloys. New sunraisers were more of the top end price wise, I'd prefer some second hand cheapies, the tyres with lanrover rims only cost me $100. Are you sure the 16x7s will be big enough for 33x10.5s?

Even if they fit illegally, they will cause the tyres to wear more won't they? Because they are being pulled in more. Also wouldn't they sit different? Like maybe taller and narrower or something?

i have 31"x10.5"x15" Simex on my hilux mounted on 15x7 CSA alloys. they fit sweet as, even at 8 PSI without beadlocks