Outer Limits 4x4 Board

... I thought I'd better introduce myself. I'm new on here although a few of you may know me from a few of the other forums I linger on (mainly LRE). Well, I'm based in the UK (mostly in the south east) and this my truck:









It started life as a 300tdi CSW but after three years and lots of ££££ its basicly changed a fair bit The spec list is way to long to go into but basicly its got lockers (ARB), winches (M8274 and Husky), a cage, a HS 2.8l TGV engine, OME suspension, Maxi-Drive halfshfts and Simex 35" Extreme Trekkers (or 255x85 BFG MTs for on road stuff)

hi will,

That's a great looking truck you have there. Did you have to do much cutting/mods to get 35" rubber under there? I wanted to put big tyres on my 110 which is also running OME suspension, but I've been told I would get problems with rubbing (on radius arms?) with 285/75s. Maybe I could run 255/85s though as they are skinnier?

YOu have a lot more accessories available in the UK than we do here for Land rovers. NIssan and Toyota are way more popular over here and so there is far more bolt on type mods available for them.

Anyway welcome to the forum

Martin

welcome here Will...good seeing you all over...also suggest pirate4x4.com for more US-based hardcore stuff...not that these Aussies aren't crazy enough...

Will,

Hi and welcome to outer limits.

hope you find the place useful and interesting.

regards
Michael.

G'day Will welcome aboard great to have another tuff landy aboard

Cheers Kev

And here's another one of Will's little "moments"


Yes, that's the GROUND visible through Will's window:


Hi Will

Welcome Will, looks like a nice 90.

Hi Will

Welcome aboard.

I look forward to many interesting contributions from good old blighty!

Regards

Nigel

Glad to find Will here (and Rick and TC before)
as I came here from the good LRE Forum as well.



Whoops...My mistake I forgot to introduce myself

not having a nice 90 as Will I'll look for something else of mine
to upload asap...

Hi again guys,

Thanks for all the comments about my truck, you'll make me blush

Martin, you'll find you shouldn't have too many problems fitting 35" tyres. Your drivetrain'll hate you be all you'll need to do is trim the rubber/plastic arches to allow the tyres to clear when articulating. Ypu've got a 2" lift so it really isn't a problem.

FF, cheers for those photos, not one of my cleverest moments I only though the water was a few inches deep, not 3 feet!