GQ Sway bar release to sway bar itself, extention
Posted: Mon Oct 18, 2004 12:34 pm
as stupid as this may sound its a small thing that annoys the piss out of me, when lift kit fitted i bodged up the extention bar to on side where sway bar release is and its not the best fit and knocks on any suspension movement. other side is fine where ext that came with kit designed for models with out sway bar release are. Can i simply by an extention designed for this release set up ........
seems to work ok?, just needs quientening!!!!!!!!!!
car proby sits at about 5 inch lift if that even with 1.5 blocks and 6 inch no block kit, apparantly renouned for sagging i found out! most others at this height run sway bars or just get over it and roll around!
considering slightly bigger springs and ones that will hold height!
as scrub coming more and ,more into play with new 35s
Bingham
seems to work ok?, just needs quientening!!!!!!!!!!
car proby sits at about 5 inch lift if that even with 1.5 blocks and 6 inch no block kit, apparantly renouned for sagging i found out! most others at this height run sway bars or just get over it and roll around!
considering slightly bigger springs and ones that will hold height!
as scrub coming more and ,more into play with new 35s
Bingham
