Outer Limits 4x4 Board

I'm hoping someone has a catalogue with specs or a set of 6 inch lifted 80 springs lying around. I'm after the free length of the spring.Anyone,Liam ?
My current ones are apparantly 4 inch medium duty, they stand at 50cm's or 19.5 inches. I need about 3-4 inches MORE than this and heavy duty

Thanks alot !! , Jeremy

just went and had a look at mine dunno wheather this is any good but my ones with the weight on them stand at 450 3inch soft............ ill see later i might get the high lift out and measure the free length

Thanks trav !! I was gonna msg you and ask but remembered yours are tied in so you couldn't just ramp it and measure.
Mine sit between 380 and 390 at rest
Cool, i might go heavy duty in those then, you said a while back they were two fitty or something didn't you ? Cheers,

HI JEREMY
DUG OUT MY LIST FROM WHEN I FITTED MY 6 INCH NO BLOCK KIT AND THE FREE LENGTH OF MY SPRINGS WAS FRONT 585MM REAR 545MM THESE SPRING CAME OUT OF ANOTHER TRUCK AND HAD ABOUT 6 MONTHS USE BEFORE I MEASURED THEM HOPE THIS HELPS

hi physcho, is your caps lock button stuck on ? or you been looking at THOSE sites again.

hey you know i'm a top navi just shit on a computer

for the first and last time i'll have to agree with you!

Thanks alot physco

Jeremy,

When i got my 6" springs new they were 685 on the front and 660 on they rear.. Free Height

Kyle