Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

motormounts 7mge swap

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
sid
Posts: 12
Joined: Sun Apr 25, 2004 7:23 pm
Location: germany

Contact:
Contact sid

motormounts 7mge swap

Post by sid »

hi

everybody says that the motormounts line up if u do the swap.
the problem is, nobody has tried it with the 4Y stock in it, everybody had a 2L or R22

what do u guys think?
are the motormounts on a 4Y the same as 2L or 22re ??

thanks
sid
Top
Posts: 65
Joined: Fri May 07, 2004 12:12 pm

Post by PSI3y »

i am quite sure that the 4y mounts will be in a different location. my 3y mounts were way too far back and would have made the engine sit too high. you will have to make new ones. its not too hard to do tho. a welder and some 8mm steel is all that is needed.
Top
sid
Posts: 12
Joined: Sun Apr 25, 2004 7:23 pm
Location: germany

Contact:
Contact sid

Post by sid »

thanks

so i dont need the 5mge mounts and can use the 7m mounts becouse they wont fit also.. or??
Top
Posts: 65
Joined: Fri May 07, 2004 12:12 pm

Post by PSI3y »

it depend on the chassis rail bends in certain areas and may hinder the application of the 7m mounts. IMO get the engine in there and have both at the ready. then you will be able to see it line up and you can use whatever fits. or do your howework with a tape measure. whatever suits
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 3 guests