Outer Limits 4x4 Board

Hey guys, I've been offered some f100 rims to buy, but was just wondering how much work do they need to make them fit onto my sierra?? Has anyone done this to a set before??

they bolt straight on man just ask the search button to your north

The guy selling them told me "to fit a sierra you would need to enlargen the internal diameter(where it goes over the hub). the stud patterns are the same"...... But I always thought that they bolted straight on aswell. These are a newer rim that also suit a F250. would that change things??

Check the inner diameters as there are some smaller and the hole spacing is also different as far as i know.

I almost got duped by this as well.

cheers

F250 is generally 8 stud, you need the older F100 5 stud rims.

older F250 rims are also 5 stud.

these rims are off 2wd f100/f250
the studs match checked on my rocky which are the same as zooks.
only prob is inners are too small(smaller hub on 2wd).
can be enlarged via lathe/die grinder.
would do it myself just lazy and scored bigger offset rims..

you want F100 or F150 4x4 rims. F250 or F350 are almost all 8 stud. you want 5 on 5.5" pattern.

I have had 3 diferent types of ambo/F100 rims on my vit and haven't had to do a thing to them but can't you just check one!!