air tank setup lines??

[Slayer]

want to run a small dia line from the air tank in the back to a gauge in the cab so i know the status of the tank.. thing with such small hose like thickness of air locker line is how to conect the ends, to small for clamps and stuff!..
where can i buy all the fittings and stuff.. need to go into female at the the tank, and onto the back of the gauge, which is male, both the same thread,

any shops people know in ACT ?? or are there things u can bootyfab... iv found that dripper line shit from bunnings holds the presure but i cant seal the ends? any ideas??

cheers
what have other pople got?

[RaginRover]

Pirtek & Enzed will have the things you need - I assume they are in canberra

Tom

[spazbot]

try and find a local festo or norgren distributer they will have what you need

[Carl Coight]

Any truck or earthmoving place will have them.

[dow50r]

Look up instrument suppliers,
Andrew

[Woop]

The easiest type of fittings to use are the push fit type. PIRTEK or ENZED should have some. With these type of fittings, you push the tube into the end of the fitting and it locks in place. Then you just screw the fitting into the tank/socket. They work well and can be re-used--make sure you tell the shop if its imperial or metric size that your after when purchasing..

Nick

[Screwy]

Could u not use ARB air line and the Locker fitting that screws onto the diff?
The type with the spring on it but get rid of the spring?

just an idea.

cheers