Outer Limits 4x4 Board

I need to get my front right guard off to do some pannel beating but i cant get the screws undone?Is there somehting im missing here? i can get the flareoff easy enough but the bloody right guard i cant budge any of the screws that hinge it to the door or the front grill.

Tosh

Impact screwdriver. they can be an absolute bugger to get off. Other options is to cut them off carefully with a grinder and then use new ones to put it back together

BundyZook wrote:I need to get my front right guard off to do some pannel beating but i cant get the screws undone?Is there somehting im missing here? i can get the flareoff easy enough but the bloody right guard i cant budge any of the screws that hinge it to the door or the front grill.

Tosh

usualy takes an impact screwdriver, or air tools to crack them off...some people butcher them off, but that risks snapping off the head...good luck, christover

Hey,
Try useing a small chissel and hammer to try and turn them,
otherwise do what grimbo said and grind them off.

grind a slit in the bolt and use a BIG flat blade screw driver , ive had ones were ive used a hammer and chisel and it still wouldn't move but the big screwdriver got him , and a impact driver should have no dramas as long as you hit it Hard!

I used a big phillips head screwdriver teamed with a ratchet and socet to get my doors off. Screwdriver sits in the socket, you apply pressure with one hand, and turning force with the other.

If the panel is dented why not just leave it??

It may not be dented, he may just want to trim the guards, and isn't confident doing it on the vehicle.

Its Dinted Really Dinted. Just want to get it out as much as i can. Kinda looks crap cause the rest of the car is so clean and theres just this big f****n dint in the front right.

Tosh