Page 1 of 1
who in syd does vit lifts?
Posted: Mon Nov 01, 2004 10:17 pm
by SiKiD_01
ok, i know some one who has a vitara, and wants to lift it. they are in the sydney area.
the want to get about 3" lift from sus.
so who deals with this in syd? any shops? any one to contact?
thanks
steve
Posted: Tue Nov 02, 2004 4:35 am
by mudfkr
Steve,
How is he going to get a 3" lift, 2" OME with spring spacers as well ??
The only 3" kit that I'm aware of for the Vitara is the Calmini one and in which case he'd be better off ordering it direct from the US and saving a few $$.
I just ordered mine last week from them (had to wait for them to get it back in stock
) and with the currant exchange rates it was
less than OME would have cost me over here.
OME = $1650 nz
Calmini $1517.60 nz - to my door (+ import duty and GST)
Shane
Re: who in syd does vit lifts?
Posted: Tue Nov 02, 2004 5:06 am
by redzook
SiKiD_01 wrote:ok, i know some one who has a vitara, and wants to lift it. they are in the sydney area.
the want to get about 3" lift from sus.
so who deals with this in syd? any shops? any one to contact?
thanks
steve
try Overkill Engineering
94766137
Posted: Tue Nov 02, 2004 8:58 am
by SiKiD_01
thanks for the info.
i think she might get a 2" suspension, and maybe a 2" body lift done, seems to be the simplest, rather than going for the calmini 3".
not sure what brands yet, but still looking.
thanks again.
steve
Re: who in syd does vit lifts?
Posted: Tue Nov 02, 2004 3:06 pm
by Gonzo
SiKiD_01 wrote:so who deals with this in syd? any shops? any one to contact?
I do, and i work for beer
Posted: Tue Nov 02, 2004 6:59 pm
by Dick
You could make your own up using custom coils from "Allsprings" down there... They know Zooks.. Whack some longer shocks in and you are away! I got 3" lift in the front and nearly 4" in the rear...
Re: who in syd does vit lifts?
Posted: Tue Nov 02, 2004 7:01 pm
by stumped
Gonzo wrote:SiKiD_01 wrote:so who deals with this in syd? any shops? any one to contact?
I do, and i work for beer
yeah, but we've seen your vit
Posted: Tue Nov 02, 2004 9:21 pm
by Beastmavster
And what's wrong with his vit? Just cos he did the drunken angle grinder work?
Posted: Tue Nov 02, 2004 9:53 pm
by stumped
i'm just jealous cos i'm only running 31s
fasdf
Posted: Tue Nov 02, 2004 9:55 pm
by SiKiD_01
HEY! whats wrong with 31"s?
Re: fasdf
Posted: Tue Nov 02, 2004 10:01 pm
by Gonzo
SiKiD_01 wrote:HEY! whats wrong with 31"s?
they're 2 inches too small
fdsfasdfga
Posted: Tue Nov 02, 2004 10:49 pm
by SiKiD_01
Posted: Thu Nov 04, 2004 5:45 pm
by RIKSTR
Kaos can hook you up with a 3" Calmini kit, it is about the only way to do it right, and with the 3" body you can fit 32" easy
Posted: Thu Nov 04, 2004 5:53 pm
by SAWZALL
RIKSTR wrote:Kaos can hook you up with a 3" Calmini kit, it is about the only way to do it right, and with the 3" body you can fit 32" easy
3 inch lift + 3 inch cut = 32's
Posted: Thu Nov 04, 2004 5:59 pm
by Gonzo
uphiir wrote:RIKSTR wrote:Kaos can hook you up with a 3" Calmini kit, it is about the only way to do it right, and with the 3" body you can fit 32" easy
3 inch lift + 3 inch cut = 32's
3 inch suspension + 1 inch body + fucked if i know how much i cut off = 33's
Posted: Thu Nov 04, 2004 6:05 pm
by SAWZALL
Gonzo, will you be at Nissan Trials. I wanna check out your Zuk...
Posted: Thu Nov 04, 2004 6:35 pm
by Gonzo
uphiir wrote:Gonzo, will you be at Nissan Trials. I wanna check out your Zuk...
i think i may be going there just to watch, but i have doubt it.
will be doing a day trip somewhere (lithgow maybe) on sat
failing that just come over to nth syd and have a poke...