Outer Limits 4x4 Board

Hi guys,

well I have found the cause of my front end bounce in my GQ. I installed the 6" coils and shocks that I bought s/h and they ran well for a coupla thousand ks, but on the weekend I ripped one of the lower mounts through the mounting point on the diff housing, breaking the washer and losing the rubber. Amazingly the nut was still on, so I just need to get a new washer and rubber in the short term.

Long term I will be getting the right length shocks.

My rancho RS9000s have a code on them of 9159 or 2C2154. That's all that is ledgible to me. Anyone with Ranchos running a 6" lift, can you please supply your codes for comparison.

I think I might go tough dog if I have to buy new. Thoughts?

Andrew

Gady coke
FRONT RS99009 with pin to eye still to short for me

BACK RS99005 spot on in length with cut and re welded bottom mounts
cheers steve

Be carefull with shock diameter as mine just nick front shock tower on full drop not sure on tough dog diameter
just a thought

thanks Steve. I just spoke to Auto Alliance (Rancho) and they said that the shocks that I have on the front are only for 2-3" lift in a GQ. I have fitted some nolothane bushes to them this arvo and this will do until I decide what to replace them with.

I bought my gear s/h so I was ripped in a few areas.

I have priced tough dogs at 260 ea for the fronts. Can anyone better that?

Rancho only wanted to sell me four for some reason, and that was $792 complete, but the guy wouldn't give me the codes for the shocks, something about not for retail. Pretty strange really, considering he confirmed the old codes were for 2-3" lift...

Andrew

Try ringing mannell he will know lengths and code`s off his head and price`s for both
well he should. Anyway there is a sale on at mannells next weekend 13th
i got the flyer today and it reads SAVE $$$$$ ON THE DAY +FREE SAUSAGE SIZZLE and lucky door prizes on the hour every hour
mabe go see him.