Page 1 of 1
Holden commodor V6 into HJ60 Series cruiser
Posted: Tue Nov 02, 2004 7:57 pm
by Bazz107
Hi,
Does anyone know if you put commador V6 into HJ 60 cruiser and if you can is there any Kits for the 5 speed box. Have V6 motor and dead cruiser so was thinking the two could meet.
thanks
Byron
Posted: Tue Nov 02, 2004 8:57 pm
by +dj_hansen+
Marks 4WD has heaps for V8 conversions, but also a whole pole of wiring and computer interface gear.
http://www.marks4wd.com/lc-60seriesindex.html
While castlemain rod shop list a BH 1 Toyota Steel Case to Holden Six.
http://www.rodshop.com.au/bellhousings.htm
That should put you in the right direction dude.
Posted: Tue Nov 02, 2004 9:01 pm
by Raymond Spackman
I have seen one that had a V6 but he used the auto box aswell. You can get an adaptor for the auto to go to your transfer from Marks Adaptors. I am not sure about an adaptor to go to the 5 sp manual in the cruiser. Mabe check the Marks adaptors site.
www.marks4wd.com
Posted: Wed Nov 03, 2004 10:27 am
by v8zuki
marks dont do a 5sp to v6 in a cruiser . i fitted one with an auto and it went really well as good as the standard 2f but better economy