i bought a set of recurved springs of ??? about 3 months ago and after installing them the reaper leans pretty badly to the drivers side ive removed the springs swaped sides just to see if the springs have saged and it rectified it about 50% . ive spoken to the ahem supplier whom never got back to me even after me contacting him on three occasions. I've removed the spare wheel etc but no change . The odd time it will sit level about 2 times out of ten and the chassis is all straight as it would seem any thoughts
p.s the bushes are all well greased
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
leaning springs?
leaning springs?
if its worth doing do it intensly , better still do it with MADPASSION
set your limits way beyond your abilities
set your limits way beyond your abilities
Put your big ass tool box on the passanger side and anything else you have in the 4by I had a small piece of steel that skippy will tell you about 20 to 30 kgs as well as my tool box and it sat level most of the time and that was with one person in there.
Skippy still has that piece of steel DON'T YOU SKIPPY
Skippy still has that piece of steel DON'T YOU SKIPPY
The Ratkrawler
Surgery will fix your ugliness but not your stupidity?
Surgery will fix your ugliness but not your stupidity?
Who is online
Users browsing this forum: No registered users and 0 guests