Page 1 of 1
Heuston we have a problem
Posted: Sat Nov 06, 2004 8:53 pm
by rocknferoza
Coming home tonight the
CHECK ENGINE light came on pushing the feroza upto 110 but went off after backing off. It happened twice but wouldn't do it after that.
Any ideas
Could it be anything 2 do with the new exhaust system
Thanx
Posted: Sat Nov 06, 2004 9:35 pm
by built4thrashing
mine used to do the same but was on gas. it was coz it was running rich or lean at the oxy sensor only on gas but
oxy sensor might be dodgy. check ya fault codes
Posted: Sat Nov 06, 2004 10:35 pm
by newbyferoza
yeah mine did that for about a week then stopped, and that was six months ago
Posted: Sun Nov 07, 2004 9:51 am
by murcod
Why don't you check what fault code is logged instead of trying to guess?!
Most likely be the oxy sensor- probably past the use by date like mine was. Mine only showed up after doing the exhaust too, because it was rusty and open circuit beforehand.
Posted: Sun Nov 07, 2004 2:43 pm
by icebreaker
What are replacement oxy sensors worth????
Posted: Sun Nov 07, 2004 6:20 pm
by murcod
Around $80- do a search or look in the FAQ. I recently posted a spiel on them with part numbers for NGK oxy sensors that fit.
Posted: Mon Nov 08, 2004 8:28 pm
by Dave Fogwill
hey guys,
Call me stupid, but how do you actually check the fault codes?
Thanks
Dave.
Posted: Tue Nov 09, 2004 4:13 am
by SimplyPV
hey fogwell... your stupid!
i believe its in the f.a.q. section under fault codes or daigansis or something of the sort. check it out. also look up under oxy sensor as well.
Posted: Tue Nov 09, 2004 7:22 am
by icebreaker
Be nice.. I wouldn't have known either... And I haven't taken that much notice of the FAQ's, etc
Posted: Tue Nov 09, 2004 9:00 am
by murcod
Have you guys downloaded the F300 Service Manual? It's got all sorts of good stuff like that in it.
(Click on my hompage link if you haven't got it.)
I have done a "How To" on here, but the pics won't be visible
so it will be pretty useless.