Page 1 of 1

Hilux X over steering help

Posted: Fri Nov 12, 2004 2:55 pm
by BadLux
Hey all,
I'm considering doing x over steering on the lux cos the other power steering box has had it. I was looking at the snake racing stage 1 kit for $1350 but then noticed the stage 2 kit had a few extra bits and pieces. Now what i'm confused about is that can you make the x over steering with just the IFS hilux box and the stage 1 kit?? Or do you need the 50mm crossmember spacer and the other extra bits to do the conversion?? Just trying to price up what i'm looking at for the entire setup. Anyone who has done the snake racing or ORI X over steering any help would be great. Ie what it cost and what parts you need. Cheers guys
Bad Lux

Posted: Fri Nov 12, 2004 3:14 pm
by ausyota
M&M engineering also do Hi steer crossover kits.
PM Mczook for details.
Paul.

Posted: Fri Nov 12, 2004 3:27 pm
by 4sum4
are you after cross over steer or high steer

Posted: Fri Nov 12, 2004 4:01 pm
by BadLux
Hey umm dunno what the difference really just wanna get the steering rods out the way of trouble, cheapest most effective way I guess. Whats the differences with the two options??

Posted: Fri Nov 12, 2004 4:42 pm
by HUNTERLUX
then go the snake hi steer xover it gets your steerin rods out of harms way

Posted: Fri Nov 12, 2004 4:55 pm
by BadLux
do you need to put in the 50mm front crossmemer spacer in for that kit?? Because I don't really want to have to do that. because doesn't it mean you can't get an arb bullbar if you use this spacer??

Posted: Fri Nov 12, 2004 5:15 pm
by HUNTERLUX
i had 2 put the spacer under but due 2 the body lift i have modify the b/bar any way this w/e
if your tight 4 cash buy 1m length of 50x100mm tubing from metal shop and slowly 9inch your current spring mounts then weld your mounts to the tube then the tube 2 the chassis & so on

Posted: Fri Nov 12, 2004 5:47 pm
by Macca177
Ivew got the ORI X/over setup with all new tierods etc.. i used a 4runner ifs box(ment to be the best for the job) i haev no complaints bout the job. its nice steering now:) never bent nothin since...i duno bout price as i spent alot on extra work as well. Just give them a call or chat to any of the others suggested and see wot you liek the best.

Posted: Fri Nov 12, 2004 11:26 pm
by BOGAN V8
i thought that a 4 runner and hilux ifs box are the same thing ???????

you do have to put the dropped cross member in the front other wise the arm off the box will hit the springs

go for the snake racing kit comes with everything you need including longer studs arms the rods and the tie rod ends and the 80s pitman arm


i have done mine and three others like it and doing hunterlux s car at the moment

Posted: Sat Nov 13, 2004 9:21 am
by ... rick
We have sold plenty of Snake Racing kits and have nothing but great feedback. Can highly reccomend.

Posted: Sun Nov 14, 2004 9:24 am
by Scott
Í don't think Guts runs a dropped front cross member on his Hilux, so it must be possible to run hi steer without a dropped cross member.

Posted: Sun Nov 14, 2004 9:41 am
by spazbot
you need like atleast 4" of lift to run the histeer in the front so you can either run 4"+ lifted springs or drop ya hangers 2" and run a nicer flatter spring pack in the front

Posted: Sun Nov 14, 2004 9:59 am
by MissDrew
My front springs are only about 3 inch lift and I don`t have dropped hangers. My box is mounted so that the pitman arm JUST!!!!!!!! misses the bottom of the rail, my bump stopps are about 20mm extended and at FULL stuff on the drivers side it will JUST touch the spring. If I wasn`t going to coil coils in a year or 2 I would drop my front hangers 2 inches and move them forward about an inch and run a spring about 2 inches longer then standard.

Posted: Sun Nov 14, 2004 8:18 pm
by BOGAN V8
i cant explain it but thats what ryan said to me from snake must have dropped x member to run x over

Posted: Sun Nov 14, 2004 8:29 pm
by MissDrew
If you read my post you will see that I should have the dropped hangers to stop the steering touching at full stuff.

Posted: Sun Nov 14, 2004 8:44 pm
by BOGAN V8
like i said all i did was do what was recomended and would rather drop front hangers anyway just for to make life easy and get better ride height out of it anyway

Posted: Sun Nov 14, 2004 8:57 pm
by HUNTERLUX
fellas setle down :lol:
i just had bogan help do mine and dropin my front hangers helped level my car back out .
before it sat abouyt an inch & a half 2 low at the front and gives me about a 100 & somthin mm clearance 4 the pity arm

Posted: Sun Nov 14, 2004 9:43 pm
by My Lil Lux
I dropped mine down with Bootie Fab and not drop down crossmember, as had the prob of the mounting of the ARB Bull Bar, 12 months and not one single crack, can send you a pic if you want to know more, took me about 2 hrs all up, and cost me my time :D

(Flame suit on to protect myself from Mr (OME) Bazzle and that other bloke with the 60) :finger: