Outer Limits 4x4 Board

hi,, i need some help with a 95 hilux wheel hub. im sure all toyota ones will be very much the same.

i need to take off the disc as it is fu*ked
and i need to take off the wheel hub to do this.

ive taken off the 6 screws holding on the front cap (hub lock)
ive taked off the spring washer thats on the end of the axle

now i need to take of the hub body.. im told this is held on by cone washers? what are they and how do i get em off to get the rest ofF??

help.
thnak mick

get a workshop manual, heaps easier cause it lets u look inside of it

yeah i got the work shop manual.. but there very vaige in what the say.. thats how i know fot he cone washers..

its the normal black cover with green wirting on the front book for pertol hiluxs/4runner from 70's -97

give the hub a light tap till it breaks the seal on one side then get a big flat bladed screw driver in there and lever and tap the oppisite side till it pops off

and by the spring washer you mean the sir clip?

i was smacking it real hard..
but i was using a rubber mallet so maybe i gota try with a nylon or copper?

it wasnt a cir clip.. more like a split washer.. i aint sure

Take a brass drift and hit the studs holding the freewheeling hubs. Hit it squarely at the end as if you are driving them deeper into the wheel hub.

Dave

ai.. that worked a treat.. the brakes are all done..
new a set of new rotors was only 100 at repco..