Page 1 of 1
correctly setting up panhard bar
Posted: Sat Nov 13, 2004 1:34 pm
by crokie83
i just bought a adjustable panhard bar and was wondering what is the correct way to set it up?
Posted: Sat Nov 13, 2004 2:12 pm
by Daisy
put it on car first.
Measure from guard to the tyre on both sides and adjust accordingly.
Pretty basic.
TOM
Posted: Sat Nov 13, 2004 2:16 pm
by crokie83
cheers tom
was just making sure there wasnt any tricky stuff to look out for
Posted: Sat Nov 13, 2004 2:18 pm
by big red
remove old panhard rod.
use a ratchet strap to pull body to central position.
adjust and fit new panhard rod.
Posted: Sat Nov 13, 2004 2:21 pm
by Daisy
crokie83 wrote:cheers tom
was just making sure there wasnt any tricky stuff to look out for
what big red said
Posted: Sat Nov 13, 2004 2:29 pm
by crokie83
thanks guys
Posted: Sat Nov 13, 2004 4:21 pm
by bazzle
But one for both ends or it will crab.
Bazzle
Posted: Sat Nov 13, 2004 4:48 pm
by crokie83
its got ifs
Posted: Sat Nov 13, 2004 5:15 pm
by Cheezy4x4
Remove wheels and suport diff on axle stands, measure from disk or drum on each side to the chassis and adjust accordingly.
Posted: Sat Nov 13, 2004 9:28 pm
by +dj_hansen+
crokie83 wrote:its got ifs
Whats that.. and how can i fit it to my car
Posted: Sat Nov 13, 2004 9:46 pm
by RB zook
how do i adjust the panhard on my ifs
