Outer Limits 4x4 Board

Hi

Is there any tricks (read cheap) to give an old 60 series Cruiser about 4 inches of lift?
Not to keen on doing a spring over conversion at this stage.
Just wondering if anyone knew of any springs out of other vehicles which fitted.

Cheers Thomas

mate use 75 series springs in the front and some longer hangers . 75's are 2'' longers on the front meserment . the rear are a costom spring [main and wraper ]

This has been discussed lots of times.

Easiest way is simply 2 inch body lift and 2 inch suspension lift and it will clear 35s easy without much scrubbing at all