40 Series & 60 Series full floater rear ends
Posted: Tue Nov 16, 2004 9:26 am
Hey Toyota dudes 
Can anyone tell me the WMS measurements of the 40 & 60 FF rears?
Can anyone tell me the WMS measurements of the 40 & 60 FF rears?
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
40 Series & 60 Series full floater rear ends
Page 1 of 1
Posted: Tue Nov 16, 2004 2:22 pm
Any1?
Posted: Tue Nov 16, 2004 2:53 pm
Sorry dude, I just picked up a FF to suit a 40 series, its on my garage floor. I'd be happy to get some measurements as soon as u let me know WTF WMS is.
Posted: Tue Nov 16, 2004 3:14 pm
RAY185 wrote:Sorry dude, I just picked up a FF to suit a 40 series, its on my garage floor. I'd be happy to get some measurements as soon as u let me know WTF WMS is.
WMS = Wheel Mount Surface. Basically it's the distance between the wheel mounting surface on each side.
Posted: Tue Nov 16, 2004 3:23 pm
Ok, I measured my 40 series FF WMS out to 1430mm. I heard the 60 series is about 3 inches wider but couldnt be sure.
Hope that helps
Hope that helps