Hi Steer Pitman Arms
Posted: Tue Mar 25, 2003 4:56 pm
Wot is the shortest pitman arm you can get
dunno but i run a 100 series one on mine
i can get measurements 2mora if u want
Page 1 of 1
Posted: Tue Mar 25, 2003 11:15 pm
Posted: Wed Mar 26, 2003 9:02 am
Cheers, a measurement would be kool
Posted: Wed Mar 26, 2003 6:19 pm
want me to measureize 60 and 70 (bundera) series ones? have one of each, spoze they're for sale.
Posted: Wed Mar 26, 2003 6:51 pm
yep that would also help
measured an 80 series which is about 180mm between hole centres, looking for a real short one !!
measured an 80 series which is about 180mm between hole centres, looking for a real short one !!
Posted: Wed Mar 26, 2003 7:03 pm
wot model 80 series coz if it is 95 or later it is the same as a 100 series arm. not sure wot the difference between the early and late model arms r tho.
Posted: Wed Mar 26, 2003 7:10 pm
the one I measured was about 1990
Posted: Wed Mar 26, 2003 7:18 pm
just measureed mine now dude and its bout 180mm between hole centres so maybe they r they same all thru the models or maybe the dude at the wreakers gave me the rong 1 
Posted: Tue Apr 01, 2003 3:07 am
We use the IFS pitman arm as it is the shortest we know of and we sell the pitman arm and tierod adapter for $150...
Posted: Wed Apr 02, 2003 6:53 am
lachlan do u have a pic of the IFS pitman arm and the adapter ?
Posted: Wed Apr 02, 2003 8:42 am
the IFS arm does not wrk well with leaf sprung front ends
shorter by around 10mm over a 75 series pitman is the 40 series piman when used in the right way. the two shortest ones i can think of off-hand
hilux factory steering arm (too much drop though very short) should fit
daihatsu feroza = perfect
shorter by around 10mm over a 75 series pitman is the 40 series piman when used in the right way. the two shortest ones i can think of off-hand
hilux factory steering arm (too much drop though very short) should fit
daihatsu feroza = perfect
Posted: Mon Apr 07, 2003 5:15 pm
ifs pitman with adaptor