Page 1 of 1

holden Turbo 350/400 Auto's

Posted: Fri Nov 19, 2004 9:04 pm
by BASSYK
how can i tell if my auto is TH-350 or TH-400 ?

also , are the TH-350 and 400 Torque converters the same?

i was told that my auto was a turbo 400 , however i have just pulled the motor out and the torque convertor has "turbo 350" written on it

ive since bought another 308 which had a turbo 400 behind it and has "turbo 400" written on it.

i need to know i f i have to change the convertors or if i can just leave the 400 convertor on there

thanks

Posted: Fri Nov 19, 2004 9:50 pm
by RV80
converters do interchange. however the
stall speeds may vary.
http://www.transmissioncenter.net/350_o ... rmance.htm

Posted: Sat Nov 20, 2004 8:08 am
by Extreme_Trans
Hi it's Rodney here from Wholesale Automatics. All Holden cars fitted with the T/400 used T/350 convertors. Infact most T/400 transmissions run the T/350 size convertor, it's only the U.S imports where you might find the larger T/400 convertor.

The T/350 transmission has the vacuum modulator facing rearward on the drivers side rear corner of the transmission while the T/400 has it's vacuum modulator facing outwards ( Sideways ) on the drivers side front corner of the transmission.

Regards
Rodney

Posted: Sun Nov 21, 2004 1:31 pm
by BASSYK
thanks for your help rodney

il have to have a look ay mine later