Page 1 of 1
Weights of parts
Posted: Thu Dec 02, 2004 7:37 pm
by nicbeer
gday
Can someone give me a weight of a 1ltr late xfer case? for freight purposes.
Post up any other weights as I'm sure everybody will benefit.
thanks
Posted: Thu Dec 02, 2004 9:02 pm
by -Mick-
dude I took it to my other work tonight but the scales don't go over 10kg
So yeah if anyone knows the weight that'd be good
Posted: Thu Dec 02, 2004 9:21 pm
by nicbeer
doh.
Bump
Posted: Fri Dec 03, 2004 8:35 am
by stumped
mud4b told me a 1.3L with 5.14 calmini's in it weighs 20kg with oil in it... guessing the 1L wouldn't be toooooooo far off that
incidentally, was around $30 to auspost (4-6 days) from brissy to newcastle
Posted: Sat Dec 04, 2004 10:29 am
by lay80n
Try searching, Daryl posted up a heap of weights a while ago. Might help ya. I cant search (using olds computer and its farked) so cant give ya a link.
Layto....
Posted: Sat Dec 04, 2004 10:55 am
by CRUSHU
I sent NT diff parts a while back. I sent a diff centre and the short axle (rear) in 1 package, @ about 20kg
sent the other axle and the drums in another pack, also @ 20kg.
there is a 20kg limit thru Australia post. it is about $20 - $25 between the eastern states, and upto $35 to perth.
Use your bathroom scales to weigh stuff. fairly accurate, and everyone has one. use a rag so you don't get it dirty
or the missus will kill you
zook parts weight
Posted: Sun Dec 12, 2004 9:47 pm
by toysuzi
zook parts
1.3l transfer case with mounts/cross members/ shifters 25kg
1.3l gearbox with gearshift + boot etc 25kg
complete 1.3litre engine 85kg
complete rear diff with springs/shock/brake lines etc 85kg
complete front diff with suspension/steering etc 105kg
i got bored one day waiting for funds to build the toysuzi
so that explains the time spent weighing spares
hope that helps
daryl
Re: zook parts weight
Posted: Mon Dec 13, 2004 7:21 am
by HRZOOK
daryl wrote:zook parts
1.3l transfer case with mounts/cross members/ shifters 25kg
1.3l gearbox with gearshift + boot etc 25kg
complete 1.3litre engine 85kg
complete rear diff with springs/shock/brake lines etc 85kg
complete front diff with suspension/steering etc 105kg
i got bored one day waiting for funds to build the toysuzi
so that explains the time spent weighing spares
hope that helps
daryl
I think you just ate a zook encyclopedia
HRZOOK
Posted: Mon Dec 13, 2004 9:17 am
by stumped
stumped wrote:mud4b told me a 1.3L with 5.14 calmini's in it weighs 20kg with oil in it... guessing the 1L wouldn't be toooooooo far off that
incidentally, was around $30 to auspost (4-6 days) from brissy to newcastle
this ended up being right... it's on it's way down now
1L should be same or less i guess