Page 1 of 1
free wheel hubs
Posted: Mon Dec 13, 2004 11:37 am
by bad_religion_au
can anyone tell me if the free wheeling hubs of a 78 fj55 (drum brakes) will fit a 76 fj40(disks)
Posted: Mon Dec 13, 2004 12:01 pm
by 83 lux
yes and no depenise on CVs
Posted: Mon Dec 13, 2004 12:09 pm
by beanz2
They should.
Dave
Posted: Wed Dec 15, 2004 9:23 am
by 80UTE
Nooooooooooooooop drum C/V's are longer.
Wally
Posted: Wed Dec 15, 2004 2:58 pm
by beanz2
80UTE wrote:Nooooooooooooooop drum C/V's are longer.
Wally
Are you sure? The part numbers for the CV's are the same from Sep '75 until Dec '78. The same for drive flanges (non locking hubs) for the front.
Do you guys get front disc brakes in the 40 or 55 series before 1979?
Dave
Posted: Wed Dec 15, 2004 6:45 pm
by bad_religion_au
yeah, Pt numbers are the same according to the australian parts site i looked up
but yeah we got disks on 76 and up 40's, but drums only on 55's. different drums to the pre 76.
as far as i can tell, the cv's have the same spline count
might say bugger leaking, and pull em and see (off my Dayly driver)
so what grease do i repack them with?