Outer Limits 4x4 Board

Removed my manual locking hubs today only to find that the past owner of my Rodeo has used a different CV axle on one side than the other.
In an atempt to remove the axle I totaly destroyed a generic all purpose ball joint puller.
Phoned Holden to see if they sold one with no luck... Does anyone out there know where I can get a bullet proof ball joint puller to get the bottom joint off the hub?? Tried Repco, Autopro, Supercheap ...etc etc

Cheers

Rainsey

mate i work in truck spare parts and in the Kincrome book they have a heavy duty leve type ball joint remover part number 2210 , you should be able to get it or order it in from any parts store that sell SupaTool tools, i think repco and supercheap sell them.

Just downloaded the cattledog.. might just do the trick..

I'll drop past Repco tomorrow with the part number

Thanks heaps!

Bugger,

Max opening capacity of Kingcrome ball joint remover ... 35mm

Size of Rodeo lower ball joint from top to bottom of thread..55mm

Strike out again!!

mate what i will do is ask the work shop at work and ask where in the gosford area you can get a big enough paller...

Bloody fantastic if you can!! Thanks heaps