Page 1 of 1
60s steering box
Posted: Wed Dec 15, 2004 3:50 pm
by ZOOK60
ive just put 60s power steering box in the zook but the standard pitman arm has a big kick down which makes it hit the springs. does anyone know of a straight pitman arm that i can run that fits this box?
Posted: Thu Dec 16, 2004 2:51 pm
by Sixty
I read somewhere on another thread that 80 series ones are flat & fit.
Al
Posted: Thu Dec 16, 2004 4:45 pm
by ZOOK60
Sixty wrote:I read somewhere on another thread that 80 series ones are flat & fit.
thanks for that i just relised if i run a dead flat arm the nut on the balljoint will hit the chassis back to the drawing board
Al
Posted: Thu Dec 16, 2004 4:57 pm
by DeWsE
Jake can you post some pic's of the conversion?
Posted: Thu Dec 16, 2004 5:08 pm
by ZOOK60
give me a week as i am only using a comp at the library. i just have to work out what piman arm to run so i can order the new draglink apart from that need to buy the pump and she is all done
Posted: Sun Dec 19, 2004 8:53 pm
by hypo
80 series arms have a slight bend in them
Posted: Thu Dec 23, 2004 1:53 pm
by ZOOK60
all done ended up bending arm with a press
Posted: Thu Dec 23, 2004 2:06 pm
by DeWsE
Hey Jake have a look at redzook's new rig thread in the zook section. He has posted pic's of his conversion on page two
Posted: Thu Dec 23, 2004 2:17 pm
by redzook
DeWsE wrote:Hey Jake have a look at redzook's new rig thread in the zook section. He has posted pic's of his conversion on page two
id say jake has seen my rig already
