Page 1 of 1
Who would be interested in a piece of plate like this
Posted: Mon Mar 31, 2003 9:53 pm
by bubs
This plate is designed to mount to the back of a hilux transfer case to replace the standard style cross member
ok
i have fixed the angle on the plate in regards to the frame
and i have narrowed it to fit between a standard hilux frame
so answer yes or no to the poll
Posted: Mon Mar 31, 2003 9:55 pm
by bubs
it is only the plate which i intend to make for the mean time you make it fit
12mm plate plasma cut
cost
Posted: Tue Apr 01, 2003 6:31 am
by Brad
all about $$$ really .. any ideas how much ??
Posted: Tue Apr 15, 2003 10:36 pm
by bubs
i have gotten a response on the price - laser cut way too many $$'s - plasma no contract style cutters use a high definition plasma like my work so all holes need to be machine drilled
cost $75 + shipping
it is now 10mm as it would be easier to get 10mm longer bolts rather than 12mm
plate now has oil fill hole as well
please pm if interested - wont be ready till may as i will order the plates next tuesday then it will be a week till i get them back to then be drilled
..
Posted: Tue Apr 15, 2003 11:24 pm
by Brad
You have mail
Posted: Wed Apr 16, 2003 11:11 am
by spazbot
Have you got a shot of one mounted, im keen
Posted: Wed Apr 16, 2003 5:06 pm
by bubs
not yet - i could take one of richards rock crawler - but the angle on his plate was wrong so it was cut and welded