Page 1 of 1
where to get round tube..sydney
Posted: Sat Dec 18, 2004 7:44 pm
by thunder
need to know where you guys get your seamless round tube from.
mate rang up one steel and they didnt carry this anymore(w/park).
i got box tube a week ago and had no problems finding it.
Posted: Sat Dec 18, 2004 9:10 pm
by spazbot
most ppl in syd dont ues proper seamless dom as it costs a farken fortune.
Posted: Sat Dec 18, 2004 11:26 pm
by Slunnie
I'm pretty sure Blackwoods carry it.
Posted: Sun Dec 19, 2004 10:45 am
by Surfection
British International Trading
34 Bearing Road, Seven Hills, 2147
NSW, Australia
Phone: (02) 9674 4566 Fax: (02) 9674 5834 Intl: +61 2 9674 4566
email:
sales@britint.com.au
DS McCulla & Son
71 Belmont Street, Alexandria, 2015
NSW, Australia
Phone: (02) 9698 2959 or (02) 9698 3721 Fax: (02) 9319 6545
Posted: Sun Dec 19, 2004 11:05 am
by Tiny
Van Luen (spelling????)
Posted: Sun Dec 19, 2004 4:42 pm
by thunder
spazbot wrote:most ppl in syd dont ues proper seamless dom as it costs a farken fortune.
what r they using then.. he wants tube to make a tray for his lux.
Posted: Sun Dec 19, 2004 4:44 pm
by thunder
Surfection wrote:British International Trading
34 Bearing Road, Seven Hills, 2147
NSW, Australia
Phone: (02) 9674 4566 Fax: (02) 9674 5834 Intl: +61 2 9674 4566
email:
sales@britint.com.auDS McCulla & Son
71 Belmont Street, Alexandria, 2015
NSW, Australia
Phone: (02) 9698 2959 or (02) 9698 3721 Fax: (02) 9319 6545
thanks jeremy .its for russell .U remember the guy that had the yellow twin cab lux.. now got a single cab on 35s
Posted: Sun Dec 19, 2004 5:11 pm
by spazbot
ppl just use erw or black pipe ase the dom stuff costs like 4x the amount as the other stuff and for a tray id just use 3.2mm wall erw tube
Posted: Sun Dec 19, 2004 8:06 pm
by Surfection
thunder wrote:Surfection wrote:British International Trading
34 Bearing Road, Seven Hills, 2147
NSW, Australia
Phone: (02) 9674 4566 Fax: (02) 9674 5834 Intl: +61 2 9674 4566
email:
sales@britint.com.auDS McCulla & Son
71 Belmont Street, Alexandria, 2015
NSW, Australia
Phone: (02) 9698 2959 or (02) 9698 3721 Fax: (02) 9319 6545
thanks jeremy .its for russell .U remember the guy that had the yellow twin cab lux.. now got a single cab on 35s
Yeah i remember Russ, he did an oil delivery for us about 4 months ago, said he had something in the works back then. Why does he want to outlay the $$$ for tube when he could just use pipe ? Is he trying to meet CCDA or other comp rules ? My bender can bend pipe no probs, infact i love bending pipe cause it's much softer than tube so doesn't give quite the arm workout that tube does, but because of the slightly different measurments it flattens out a bit on 90 degree bends, hardly noticable though. You can definatly feel the difference in strength/quality though.
Posted: Mon Dec 20, 2004 9:41 pm
by thunder
Yeah i remember Russ, he did an oil delivery for us about 4 months ago, said he had something in the works back then. Why does he want to outlay the $$$ for tube when he could just use pipe ? Is he trying to meet CCDA or other comp rules ? My bender can bend pipe no probs, infact i love bending pipe cause it's much softer than tube so doesn't give quite the arm workout that tube does, but because of the slightly different measurments it flattens out a bit on 90 degree bends, hardly noticable though. You can definatly feel the difference in strength/quality though.[/quote]
not for comp . maybe go pipe.
when my tray was getting done the engineer i had lined up wouldnt engineer it unless it was at least 2.56mm wall so want it to be strong...