Looking at doing a spring lift on my 92 single cab hilux, I want to go 2"-3" but i have been told i need to replace the torque rod (currently standard) with an adjustable one and a few mates have suggested new shackles, reasable pins, bushes, u-bolts and steering stabilizer. I can understand the need for new bushes with the springs and the torque rod, but do i really need all that other stuff?? Is here anything else i will need??
Also have been wondering about shocks, i have been leaning towards Rancho RS5000's for front and rear (cheapest ive seen is $130/shock) but was wondering whether to go the next step and get the 9000X adjustables. The ones im using at the moment are rooted so they definitely need replacing
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
SPRING LIFT Q's 92 hilux
Moderators: toaddog, TWISTY, V8Patrol, Moderators
SPRING LIFT Q's 92 hilux
[color=blue]92' Hilux Single Cab,[/color] [color=green]VP Series 2 V6,[/color] [color=orange]Dual Fuel,[/color] [color=white]Dual Batteries[/color]
replace torque rod if u got massive power and loose/soft springs, but spose it wouldnt hurt.
are u getting longer springs to lift? or reset old ones?
shackles are needed if olds are rooted other than that keep the olds.
if u are gettin old reset then the shackle position may have to be
changed to prevent inversion.
coloundra isnt that far from superior or the place up there.
plenty of advice an B.S to go around
are u getting longer springs to lift? or reset old ones?
shackles are needed if olds are rooted other than that keep the olds.
if u are gettin old reset then the shackle position may have to be
changed to prevent inversion.
coloundra isnt that far from superior or the place up there.
plenty of advice an B.S to go around
MULL
Spartacus wrote:replace torque rod if u got massive power and loose/soft springs, but spose it wouldnt hurt.
Replace the rod if you are lifting, it will tear away the mount on the diff housing or pull the side of your chassis off (more common) if left std.
New shackles won't hurt cause the old pins are probably all pitted with rust anyway and will tear your new bushes to peices....
You shouldn't need new u-bolts unless the pack is really heavy/thick.
If the shockies are stuffed it would be fair to assume that the steering stabilizer has done as much work but if it isn't causing a problem atm make your own decision.
You might also want a dropped draglink? to get the steering geometry back to near normal, mine pulls to the left without it on
Hope that helps..
[quote="fool_injected"]
I pity my brother when she is a teenager[/quote]
I pity my brother when she is a teenager[/quote]
Who is online
Users browsing this forum: No registered users and 133 guests