Outer Limits 4x4 Board

bought a cupholder from nissan today. Fits in the front part of the console.
part no. 6843032J101 cost nearly $43.00
A must have, so you don't spill your Beam around bumpy corners. 2 self tappers, and it was fitted. I pulled out the 2 little squares of carpet 1st, for a better fit.

mmmm beam........yum!

Post pics

pics too please

where from, I take it it is a factory part

Yepp! They're awesome! Best thing I bought for the interior yet!!

i think they are similar to the ones from supercheap for $2.00

My tinnie never leaves my hand.......if it does it is finished.

seriously, pics please

Tiny

Is this similar to the standard ones in the console, as for sale in this post here?

http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=32579

yep, thats the one. makes his console good value.

in my centre console i have 2 little spots, the small front one has carpet, the back on has old as glue marks.....

i want cup holders

Buy the part - or the console.

the cup holders are great....they are perfect size to fit a wetsuit style stubby cooler in.... that way if you dont have a drink you can put your money or your phone or whatever in them while you go flat out up that hill climb........


i just love em...... so hahahahahahahahaha to anyone who doesnt have them....

With an MQ center console, if u put 2 600ml choc milk cartons into the box section, u can also fit a can or stubby in there perfectly and its only going to fall over if u roll it.

Us guys with older nissans need to be a bit more inventive :p

CRUSHU wrote:part no. 6843032J101 cost nearly $43.00

Blackburn Nissan have 1 there they are holding for me.
$31.82

For other incab additions.... http://www.consoles.com


Tiny

bogged wrote:

CRUSHU wrote:part no. 6843032J101 cost nearly $43.00

Blackburn Nissan have 1 there they are holding for me.
$31.82

just picked it up, $30.... cant complain with that!
Although the cup holders dont look deep (EG almost like a can could fall over), they are more than 1/3rd of the can deep.

Good work dude for finding this one.. Will help heaps with a 5 yr old in the navigators seat with me ...

bogged wrote:i think they are similar to the ones from supercheap for $2.00

I found this the simplest and the cheapest , Works for me at $2 ea.....

CRUSHU wrote:bought a cupholder from nissan today. Fits in the front part of the console.
part no. 6843032J101 cost nearly $43.00
A must have, so you don't spill your Beam around bumpy corners. 2 self tappers, and it was fitted. I pulled out the 2 little squares of carpet 1st, for a better fit.

mmmm beam........yum!

Just rang Liverpool Nissan and the guy said the above number is wrong by one digit.

6843032J01 and costs $43.
Maitland Nissan (according to his computer) are the only ones that have one at the moment.

The $30 deal sounds like a bargain

Chookman wrote:.
Part no. 6843032J01 and costs $43.
part no. 6843032J101 cost nearly $43.00
The $30 deal sounds like a bargain

Correct.
Got the box infront of me, didnt even realise the extra 1 in there

Actually the box has it as
Holder Assy-cup
Part #: 68430 - 32J01
Unit list price $38.58
Unit net price $28.93
Sub Total $28.93
GST 2.98
Total $31.80

bogged wrote:Correct.
Got the box infront of me, didnt even realise the extra 1 in there

Actually the box has it as
Holder Assy-cup
Part #: 68430 - 32J01
Unit list price $38.58
Unit net price $28.93
Sub Total $28.93
GST 2.98
Total $31.80

Bogged..

Where abouts is Blackburn??
The 3 Nissan dealers in my area (Liverpool/Blacktown/Parramatta) have all quoted $40 plus and will have to import one for me.
Perhaps yours is old stock.

Thanks

Chook

Chookman wrote:Bogged..

Where abouts is Blackburn??
The 3 Nissan dealers in my area (Liverpool/Blacktown/Parramatta) have all quoted $40 plus and will have to import one for me.
Perhaps yours is old stock.

www.blackburnnissan.com.au I think. they are in Blackburn Melbourne

I have been thinking it could have been old stock, on the shelf for few yrs maybe... they wouldnt be a high moving item.

I'll call them tomorrow and see what I can arrange, might see if we can get 10 of them at a better price... think they could sell easily

bogged wrote:might see if we can get 10 of them at a better price... think they could sell easily

Damn right ....I will check my local dealer tomorrow also. Failing that, I would be in for one.

Daniel

ordered mine today its coming over from WA will be great to finally stop spilling drinks while wheeling

92mav wrote:ordered mine today its coming over from WA will be great to finally stop spilling drinks while wheeling

depends on how hard you wheel though

bogged wrote:

Chookman wrote:Bogged..

Where abouts is Blackburn??
The 3 Nissan dealers in my area (Liverpool/Blacktown/Parramatta) have all quoted $40 plus and will have to import one for me.
Perhaps yours is old stock.

www.blackburnnissan.com.au I think. they are in Blackburn Melbourne

I have been thinking it could have been old stock, on the shelf for few yrs maybe... they wouldnt be a high moving item.

I'll call them tomorrow and see what I can arrange, might see if we can get 10 of them at a better price... think they could sell easily

id be keen too if ya could organise somethin

...sounds like a plan, see if we can get a bulk buy cheaper, sounds like most dealers will need to get em in anyway.

I made my own holder out of aluminium checker plate. It's flat and screws down under the first little flat section of carpet using the factory mounts but with longer screws and then it comes straigh up on roughly the same angle as the back of your seat. Your can fits in the rearward spot. To stop the can moving sideways, I have an empty stubby holder next to it. A perfect fit!

I'm keen if we can do a bulk deal.

berett wrote:I'm keen if we can do a bulk deal.

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=32921

can anyone find a set of cup holders for a GU?
the standard ones are pretty shitty.