Page 1 of 1
How do i lift a Paj? ;)
Posted: Thu Dec 23, 2004 4:54 pm
by M1S3RY
Finally decided to get my butt into gear and do a 2 inch body lift. What i wanted to confirm is the i need 12 blocks for a NH LWB, can someone confirm this for me and what lenght bolts will i need (Obviosly they will be 2 inches longer than standard, but what is standard)?
Thanks for any help.
-Steele
Posted: Thu Dec 23, 2004 5:01 pm
by -Scott-
Yes, you need 12 blocks for a LWB. I believe all bolts are 90mm standard, so you'll need 140mm for after. Threads are a fine pitch, so it may be easier to buy nuts and bolts. Most (all?) bolts have a washer/tang combination welded to the head, so some washers for under the bolt heads is probably a good idea too.
Cheers,
Scott
Posted: Thu Dec 23, 2004 6:05 pm
by Bitsamissin
Posted: Thu Dec 23, 2004 7:09 pm
by Hekta
I'd lost the address to Dave's site. That was the first site that inspired me to start modding the jabber. Lots of
info
Posted: Thu Dec 23, 2004 7:36 pm
by M1S3RY
Thanks guys..
Posted: Thu Dec 23, 2004 9:48 pm
by M1S3RY
Silly question #2 - Do i use High Tensile bolts?
Posted: Thu Dec 23, 2004 10:44 pm
by J Top
Yes,and nyloc nuts are good to.
J Top