Page 1 of 1
WT vs NT transfer mounting.
Posted: Thu Dec 30, 2004 6:18 pm
by nicbeer
Hey all.
A couple of q's. My transfer arm is a bit mashed up now from rocks.
On the NT drover it seems like the main arm is welded in and i thought i have seen on a mates wt that it is bolted in. Is this right??
What strengthing can be done to this area.
cheers
Posted: Thu Dec 30, 2004 6:31 pm
by bigsteve
I boxed mine up and pre drilled wholes for bolt access.
Trying to upload a pic now
Posted: Thu Dec 30, 2004 6:34 pm
by bigsteve
Posted: Thu Dec 30, 2004 6:48 pm
by nicbeer
cheers steve. Thats the short arm yes?
like -micks-
I am wondering about the other one as well, the main arm.
cheers
Posted: Thu Dec 30, 2004 6:53 pm
by bigsteve
Ahh you mean the other side,
I don't think I have a pick of a beefed up one.
I think you could just weld a rib/gusset style piece down the middle
Posted: Thu Dec 30, 2004 7:01 pm
by nicbeer
thanks.
I thought that might be the way.
Do you know if the WT are different underneath to the NT for these bits? or anyone know.
cheers
Posted: Fri Dec 31, 2004 7:57 am
by bigsteve
NT 1.3 should be the same
Posted: Mon Jan 03, 2005 7:33 pm
by zookjedi
steve is right there the same if nt is running 1.3
