Page 1 of 1
zook wheel stud size
Posted: Sat Jan 01, 2005 11:08 am
by greybeard
have had an offer of a couple of 5 stud rims from a zook. My intention is to replace the wheels on my trailer which are currently 13" holden 5 stud. Does anyone know if the stud pattern is the same as a holden?
failing that could someone please measure the distance between two adjacent studs? ie that actual centre to centre spacing between two studs. That will give me a rough idea if they are similar or not.
thanks people
Posted: Sat Jan 01, 2005 11:47 am
by bazooked
suzuki is 5 on 5.5" pcd, and holden wont fit. keep it holden its cheaper and easier.
Posted: Sat Jan 01, 2005 11:53 am
by greybeard
thanks
just removed the tread on one of the existing tyres and was looking at replacement. existing rims are pretty old and require tubes so was looking at some tubeless rims.
Posted: Sat Jan 01, 2005 1:20 pm
by bazooked
over here in perth u can pick up a new tyre and rim(holden) for around $25, at the trailer parts store.
Posted: Sat Jan 01, 2005 1:28 pm
by greybeard
have been toying with the idea of re using a couple of 31*10.5*15's from my 4runner but apart from replacing the hubs I'd need 2" flares on the guards to make it legal. so not sure which way to go. it makes sense to have the trailer wheels the same as the vehicle but it's a lot of rubber for a 6*4 trailer.
the 13" on there at the moment are smaller than i'd like and need replacing. the trailer has a downward slope due to the height of the 4runner as well.