Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Drag link problem

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 1404
Joined: Tue Jan 07, 2003 9:20 pm
Location: Sitting on Miss Janes lap.

Drag link problem

Post by Drafty »

Have a friend with a 5 inch coil lift on his GU Patrol, the ball joint angle on the drag link is too severe, is there a way or something which can be done to correct the problem?
Joe.


To succeed, focus on the solution, not the problem.
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

have one made from 30mm solid bar, with the external threads to suit the cas-chassis tie-rod ends, they have a bit more movement in them, then if you need more you can put a *slight* bend in the link right next to the thread to flatten the ends out.
Top
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

Sorry Drafty, while you were here I should have shown you my hi steer kit that lifts the arm over 3" at the swivel end. :D
It wasnt bolted on at the time, but you would have gotten the idea.
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

Bring everything that is not bolted on next weekend, I'll find something to bolt it to!
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 42 guests