Page 1 of 1
Silicon Hose
Posted: Wed Jan 05, 2005 6:18 pm
by dow50r
Gday
Can anyone point me in the right direction..im looking for high temperature silicon heater hose? The 1fzfe motors have a small piece off the back of the head that cops the heat pretty bad, and is a pull the injection off to fix it job, so i want to put some good stuff on.
Thanks heaps
Andrew
Posted: Wed Jan 05, 2005 6:22 pm
by I.M.P.O.S.E
Try your local speed shop!
Someone that deals with turbo'd stuff!
Posted: Wed Jan 05, 2005 6:34 pm
by dow50r
Might have to get the yellow pages out...dont know of any speed shops...plenty of auto1's ....theyed probably be able to get it but was hoping to get it at a good price :-) Might try super cheap ;-)
Andrew
Posted: Wed Jan 05, 2005 7:55 pm
by CJer
You could try a specialty hose shop like Harvey Hoses in Brisbane, I know they carry it.
Posted: Wed Jan 05, 2005 8:09 pm
by bazzle
You dont say where you are?? But it is carried by most turbo places, and RP Wallis the hose and belt and Donaldson people in Clayton, Vic
bazzle
Posted: Wed Jan 05, 2005 8:37 pm
by Ruggers
try a bearing industrial supply joint they most likey will carry it or will get it in and dont put the price up becuse it has the bling factor for turbos. or you can go to a truck supply place they might carry it i got to 90 degree 3 inch bends for 25 bucks each
Posted: Wed Jan 05, 2005 8:44 pm
by ISUZUROVER
Diesel truck places - like QLD Diesel Spares (QDS). That's where I bought mine.
Posted: Thu Jan 06, 2005 8:53 pm
by dow50r
Thanks guys, im in Wollongong NSW, and have found some on ebay of all places under "silicon"
Andrew