Outer Limits 4x4 Board

Posted: **Thu Jan 06, 2005 12:06 pm**

any ideas on how to fit it when the gearbox is back in?
any tips very welcome

Posted: **Thu Jan 06, 2005 2:30 pm**

I used Grease, or you could try silicon the clip is only there to hold the pin in place during assembly.

Stephen

Posted: **Thu Jan 06, 2005 2:31 pm**

Removing the clip first and leave till the next time the box is out.

plastic clip that retains slave cylinder rod 200tdi/lt77 def