Page 1 of 1
Feroza and Terios bullbars
Posted: Tue Jan 11, 2005 9:12 am
by murcod
http://www.greatsouthernbars.com.au/
The link above list that they have bullbars available for both Ferozas and the Terios.
Posted: Tue Jan 11, 2005 5:57 pm
by marc
I wonder if they have winch bars for the Feroza
Posted: Wed Jan 12, 2005 11:50 am
by Ferozaahhh
I contacted these guys via email and they got back to me the same day! They really only do work locally and recommended Parkside Towbars 9470 3633 for Feroza's requiring bar work in Perth
Posted: Wed Jan 12, 2005 12:40 pm
by murcod
So, does that mean there's no "off the shelf" bar to suit, and a custom one would need to be made??
Posted: Fri Jan 14, 2005 9:01 pm
by rocknferoza
I have just sent them an email and will post up the reply when I get one david
If I was 2 get a bullbar for mine I'd most likely get a custom tube bar made up
Posted: Fri Jan 14, 2005 10:48 pm
by marc
Please keep us posted James.
Posted: Mon Jan 17, 2005 10:22 am
by Kell
murcod wrote:So, does that mean there's no "off the shelf" bar to suit, and a custom one would need to be made??
I asked about this when I had the car serviced last. The guys told me that you had to get them custom made (they had tried to get a off the shelf one for the feroza work car) I was told that I was looking at around the $800 mark for one
Posted: Mon Jan 17, 2005 2:29 pm
by SimplyPV
hmmm.. cost me around the $300 mark for mine to be made...1/4 inch tempered/heat forged/ tubed steel...
including an a bar and a mounting platform for some spotties or a winch.. find a buddie to do it.. or someone off of the board.. they'll do it for a cheaper rate.