Page 1 of 1
probs with going high?
Posted: Tue Jan 11, 2005 5:28 pm
by BundyZook
Today i fitted 2" extended shackles onto of my already 2" body lift. the thing is it seems to be that the higher i go the closer the back of the front tyre and front of the back tyre get to there corresponding guard. is there any way to move my front tyres forward slightly and the back tyres backwards? would RUF work for the front tyres? if so i had the idea why wouldn't FUR work in the same way to bring my rears back further?
Any ideas would be good but dont say lux diffs.
Tosh
Posted: Tue Jan 11, 2005 5:34 pm
by nicbeer
Whats your shackle angle like?
cheers Should be around between like this \ or there abouts.
cheers
Posted: Tue Jan 11, 2005 5:35 pm
by BundyZook
yeah the angle on the shackles is fine.
Posted: Tue Jan 11, 2005 5:47 pm
by redzook
fronts up rear?
redrilling your perches should be the easiest way to get a bit of extra wb
toy diffs wouldnt do anything so i dont know why u added that comment
Posted: Tue Jan 11, 2005 5:54 pm
by nicbeer
Redrilling should get about 10-15mm out of it.
cheers
Posted: Wed Jan 12, 2005 4:35 pm
by BundyZook
Toy diffs with toy springs would but!
Posted: Wed Jan 12, 2005 10:02 pm
by Barathrum
BundyZook wrote:Toy diffs with toy springs would but!
that it would
just redrill the springs. i had a set of lux springs redrilled it took the shop a while.
Posted: Wed Jan 12, 2005 10:03 pm
by redzook
BundyZook wrote:Toy diffs with toy springs would but!
depends were you mounted the springs...
