Outer Limits 4x4 Board

any good cheap jap importers around the east way? in possibly after a baleno 1.6 efi or vit depending on price, also mud4b can ya get these? and how much?.

thanks graeme.

i can get these but as you said its getting hard to find them at a decent price.

ill see what i can find for you tomorrow..

If Melbourne is east enough
I got my jap import 1.3 swift/barina from >>>RE engine p/l
1800 066 179 toll free or 03 9720 4433 or FAX 03 9729 4989
cost was $850 self fitted. 17 Michellan crt Bayswater vic 3153...

another supplier is Engine Wholesalers 5/176 Canterbury Rd Bayswater Vic 3153...Phone 03 9729 6012
FAX 03 9729 6055
enginewholesalers@hotmail.com

How are these better than original ie more power or injection just before you start going of remember im new to zuks come from the world of Patrols

okay quick question ? i hate to hijack thread, but when you get a imported 1/2 cut, can you specify to include just behind the front doors, so u can get seats and gearbox? as wouldn't mind some one getting a 1/2 cut so i could look at grabing some gti seats as in nth qld they scarce.
Or am i better off approching the importers direct? well 2 cents and a free bump

bj

injected, more power and torque, plus the baleno has a lower injector manifold, so more room under ur bonnet.

benjamin78au wrote:okay quick question ? i hate to hijack thread, but when you get a imported 1/2 cut, can you specify to include just behind the front doors, so u can get seats and gearbox? as wouldn't mind some one getting a 1/2 cut so i could look at grabing some gti seats as in nth qld they scarce.
Or am i better off approching the importers direct? well 2 cents and a free bump

bj

NO YOU CANT.most of these are already cut over in japan,they then contact the importer to see if they want them..

you could try to make them find one for you though..

Sounds like the way to go will it bolt straight up the the original bell houseing how much

1.6 needs bellhousing mods.
as for seatsdepends who cuts it ,we normally get them at work.
We have just got a v6 vitara f/cut,more engs & f/cuts coming soon as we get time to go.

hey drew let me no wat u got in the 1.6 range and how much..
thanks graeme

Drew were the hell do you work any how

TJ motor imports,
we do engs,cuts, conversions all the time.
just low on zook stock for now,need to catch up on the big list of work to do then its off to japan for a buying trip.

That's good to know.

So how much roughly for the 1.6 EFI on your books Drew?

or a cultus gti frontcut...

Dude even though I could never afford it…………. How much is the V6 front cut?

Would be a good motor for the buggy

the v6 front cut is $4400 complete or $3300 for eng box wiring computer & everything to make it run.
sorry i can't give prices on stock we don't have yet as prices in japan fluctuate a fare bit,i'll put up a list of whats coming when we get back.

ouch

but yeah mate keep us posted on the prices - would really appreciate it

cheers

speck to 4play 4wd in vic he can do 1.6efi convision dual transfer as well and coil suspension mods