Page 1 of 1
How hard to fit Vitara EFI to a 1.3?
Posted: Wed Jan 12, 2005 2:51 pm
by ausyota
How hard is it to swap 1.6 EFI gear onto a 1.3?
Have a source for some vitara bits cheap.
What do I need?
And no I dont want to swap the complete engine as my 1.3 has just been recond.
Thanks
Paul.
Posted: Wed Jan 12, 2005 3:43 pm
by Badooky
if it is centre point injection 8valve then easy. not to sure about 16valve multipoint stuff.
Posted: Wed Jan 12, 2005 4:41 pm
by mud4b
16 v multi point will fit if you make a adaptor...heaps of work for little gain.
as said above...single point will bolt strait on. you only need to hook up the loom.
Posted: Wed Jan 12, 2005 8:47 pm
by ausyota
So is it worth it?
The carby is running perfect at the moment.
Havnt driven any steep angles yet though (the zook still has 205 car tyres on it
)
Not sure whether the injection is off a 8 or 16V will have to ask. So 8V is easy. Does the manifold bolt staight on? Is there a computer and stuff to hook up?
Paul.
Posted: Thu Jan 13, 2005 5:18 pm
by nicbeer
Has a computer and wiring to sort out. Doesn't look to hard to wire up.
cheers
Posted: Thu Jan 13, 2005 9:43 pm
by muppet_man67
cant you fit a 1.3 injection setup?
Posted: Thu Jan 13, 2005 11:15 pm
by ausyota
muppet_man67 wrote:cant you fit a 1.3 injection setup?
I dunno
Its just that I guy I know said I could practically have the 1.6 EFI stuff if I wanted.
Posted: Fri Jan 14, 2005 7:12 am
by OldGold
jeez if you don't want it Ausyota I'm interested
aren't the only injected G13s the twin cams, wouldn't the manifold be totally different?
Posted: Fri Jan 14, 2005 8:05 am
by mud4b
YOU can get single point injection from a sierra (jap jimny)1.3 or a vitara (jap also)1.6.
they are the same in manifolds,throttle body and do bolt on tho either engine.the difference is in the ecu,loom,injector.
this is a very easy conversion and a fair power/econemy conversion.
i have this setup on my coil sierra using the 1.6.
i can give you the wiring diagram or can do it for you.
check the suziworx sale section..