Page 1 of 1

Mitsu FAQ Tech Bible

Posted: Wed Jan 12, 2005 7:13 pm
by Bitsamissin
Ok over the coming weeks Scott and I will start populating this thread.
Hopefully it will provide an easy & quick reference to previously (and commonly) asked questions.

Data Quick Links

Axle Data
Brake Data
Engine Outputs
Model Details
T/case & Final Drive Ratios

Lockers

Transplanting a 3.5 Factory Rear Locker
Transplanting a 3.5 Factory Rear Locker (2)
4x4 Systems Lokka Vs ARB Front Locker
Front ARB Locker
ARB Front Locker Update
Swapping front diffs to fit Air Locker
Front Locker for NJ Auto
Front Detroit Locker
Front Detroit Locker Update
Front Diff Locks - Pajero/Triton
Diff Lock vs Tighten LSD

Steering/CV Boots/Front Hubs

Split CV Boots
Fitting Manual Front Hubs
Aisin Manual Hubs
4x4 Wire: Replacing CV Boots.
Front suspension modification: Balljoint spacers/flip
More on ball joint flips
Ball joint flips #3
Front diff mounts

Suspension & Body Lifts

Pros and cons of Suspension Lifts
Factory Adjustable Height Suspension info
Problems with Adjustable Height Suspension
Adjusting Torsion Bars
Adjusting Torsion Bars 2
Lifting a Gen 1
Installing Nissan coils in a Pajero
Options for NM/NP
Factory Adjustable Dampers
Rancho Shock Absorbers & lengths
Articulator Remote Disconnect
Rear Sway Bars
Large Thai Lift
NM Mods in Iceland
Gen 1 Body Lift
NH SWB Pajero Body Lift
Dave's Gen 2 50mm Body Lift Article Download
4x4 Wire's Torsion Bar Crank
ORI Gen 2 swb SAS
Vibration after big lift


Jabber SAS
Front SUSpension mods


V6 Engines

3.5 V6 Engines
LPG on a 3.0 V6
Fitting Thermo Fans to a 3.0 V6
V6 Fuel Pumps
Idle Speed Control
YES = Magna 3.5 into NL Pajero
Replacing engine in NH 3.0L V6 with magna motor?

Diesel Engines

A bit of 2.8 Info
2.8 intercooler upgrade
2.8 tdi repair info


4 Cylinder Petrol Engine

4G54 Replacement Cam
Valve Clearances
Engine Swaps?
Engine Swap vs Fuel Injection

Diffs & Ratio's

4.88 vs 5.29
5.29 Front Diff
Front Diff Measurements
Buying 5.29 Gears


Transfer Case Gears

Gearing
3.5/2.8 Low Range Gears
3.0 Low Range Gears
Fitting the 3.0 Gears

Tyres + Wheels

Who's got what?
Larger Tyres on NM/NP
Larger Tyres on a Gen 2 V6
Rim offset

General Drive Train

Gearbox Oils
5 Speed Manual shift problems
Auto Trans Shift Problems
Mitsubishi autos
Mitsubishi 5th gear problems
Transmission Oil Leaks

Electrics

Dual battery wiring
3.5 V6 alternators
A/C fan mod
Flashing Dash Lights
Tricking the Dash Lights
Flashing Dash Lights - Excellent Article compliments of HongKonger
Mitsu ECU Repair

Brakes

Brake Light Coming On

Bolt On Accessories


Winches/PTO's


Triton/Challenger/L200

Challenger coil springs
Triton mods
Big wheels for Triton
Triton overheating
Triton Turning Circle

Left-overs

Finding electronic manuals
V8 Conversion
Workshop manuals-PDF
Wincaps download
Project Pajero (NJV6 build thread)

Posted: Tue Jan 18, 2005 5:04 pm
by Bitsamissin
Excellent work Scott, top stuff..................
Keep it up dude :D

Posted: Mon Jan 24, 2005 6:04 pm
by -Scott-
Thanks Frank. :D

Updated 24 January.

Posted: Tue Jul 19, 2005 11:47 am
by fool_injected
Top idea
Is it possible to make submisssions to this thread only via moderators only
This will help to ensure the data is as correct as can be and keep the thread tidy (free from coments and debate)

Posted: Wed Jul 20, 2005 6:59 pm
by -Scott-
The general idea is that all the relevant links are in the top post - what comes after isn't really important. We could lock the thread, to stop most people posting...

If anybody finds some info which they feel should be in this thread, post up! Frank or I will read the post eventually. :D

Updated 27 February 2006.

Scott

Posted: Mon Apr 03, 2006 6:19 pm
by -Scott-
OK, I've made a new thread for people to make comments on our FAQ, without filling this thread with chat.

FAQ last updated 4 October.

Scott

Posted: Wed Oct 11, 2006 7:17 am
by Mechz
All the links are dead but it's easy to get to them if you just overtype everything in your address bar before ' /viewtopic....... ' with http://www.outerlimits4x4.com/forum/phpBB2

Posted: Wed Oct 11, 2006 9:37 am
by -Scott-
:bad-words:

Thanks for the info. I'll ask some questions...

Posted: Wed Oct 11, 2006 12:35 pm
by -Scott-
OK, think it's fixed - until Admin get bored again. :lol:

workshop manual

Posted: Sun Jan 11, 2009 9:11 am
by nudge2325
This is a link to the 4m40 workshop manual.

http://www.onlinefreeebooks.net/automot ... l-pdf.html

Its a 3.2mb pdf file. i have downloaded it and it takes bugger all time to do and it looks similar to any other workshop manuals i have seen.

cheers
Nudge