transmission spacers / packers
Posted: Mon Jan 17, 2005 6:01 pm
whats the cheapest place to get gearbox packers for my SWB & what are they worth (not fitted of course)
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
transmission spacers / packers
Page 1 of 1
Posted: Mon Jan 17, 2005 6:19 pm
ARB or the likes or most 4be shops i paid i think 40.00 for mine which was 4*6mm plates washes and complete new bolts from me local 4be shop wich was a ARB product
Posted: Mon Jan 17, 2005 6:20 pm
Sorry for double post but you can make your own if you have the skill but at that price just easy to buy then fit
Posted: Mon Jan 17, 2005 7:01 pm
not2.8 wrote:Sorry for double post but you can make your own if you have the skill but at that price just easy to buy then fit
what tools are needed to make them?
gearbox packers
Posted: Mon Jan 17, 2005 8:07 pm
Robbie buy some 40x what ever thickness you want your packers to be steel flat . Cut to length and drill 14 mm holes and you have your packers.
You will need sets of 4 if you use this method
Remove 1 bolt and buy new bolts the length of the original plus the thickness of your packers
Tools needed vice, hacksaw and drill
Dave
You will need sets of 4 if you use this method
Remove 1 bolt and buy new bolts the length of the original plus the thickness of your packers
Tools needed vice, hacksaw and drill
Dave
Posted: Tue Jan 18, 2005 5:04 am
Or you could buy mine when I remove them 
Posted: Tue Jan 18, 2005 5:06 pm
blkmav wrote:Or you could buy mine when I remove them
eh, from what you said on the phone I could "have" yours..
Posted: Tue Jan 18, 2005 7:03 pm
robbie wrote:blkmav wrote:Or you could buy mine when I remove them
eh, from what you said on the phone I could "have" yours..
You can't have everything for nothing
Re: gearbox packers
Posted: Wed Jan 19, 2005 8:54 am
davejb wrote:Tools needed vice, hacksaw and drill
You are going to cut through 12mm steel with a hacksaw???
Better invest in some shares with the blade company...
Re: gearbox packers
Posted: Wed Jan 19, 2005 1:12 pm
muzza_fattire wrote:davejb wrote:Tools needed vice, hacksaw and drill
You are going to cut through 12mm steel with a hacksaw???
Better invest in some shares with the blade company...
good idea there.Re: gearbox packers
Posted: Wed Jan 19, 2005 1:34 pm
muzza_fattire wrote:davejb wrote:Tools needed vice, hacksaw and drill
You are going to cut through 12mm steel with a hacksaw???
a job for the apprentice
Posted: Wed Jan 19, 2005 8:32 pm
Ive got a set here for $50 4 plates
Bazzle
Bazzle