Page 1 of 1
Crown Wheel and Pinion Q
Posted: Thu Jan 20, 2005 12:47 pm
by crankycruiser
Will the crown wheel and pinion outta a hilux front diff fit in a high pinion 80 diff???
Probably a stoopid question but if u dont ask u dont learn...........
Posted: Thu Jan 20, 2005 2:59 pm
by ausyota
nope.
80 series centres will take only 80 series gears.
Posted: Thu Jan 20, 2005 3:12 pm
by dow50r
Cranky
the lux has the pinion in the lowr part of the hemi as in the rear of an 80. That means the gears are cut reverse for the lux, or reverse for the 80 depending on your view point :-0
100 series 4.3's will fit though!the whole diffs that is...bigger brakes, lower ratios, cheaper rims...lol
WHADAYA thinkin of doin??
Andrew
Posted: Fri Jan 21, 2005 9:30 am
by crankycruiser
dow50r wrote:Cranky
the lux has the pinion in the lowr part of the hemi as in the rear of an 80. That means the gears are cut reverse for the lux, or reverse for the 80 depending on your view point :-0
100 series 4.3's will fit though!the whole diffs that is...bigger brakes, lower ratios, cheaper rims...lol
WHADAYA thinkin of doin??
Andrew
I just wanna get some higher? raitos so i get my power back on the rd...
Runnig 35's on raod sucks
Posted: Fri Jan 21, 2005 3:14 pm
by 4sum4
you can fit ring a pinions out of a bundera for the front but not sure what ratios are available for the rear
Posted: Fri Jan 21, 2005 6:43 pm
by Zeyphly
One of my mates was running 33 on his lux and he got hold of some 5.3 centers down here
Posted: Fri Jan 21, 2005 6:59 pm
by Zeyphly
One of my mates was running 33 on his lux and he got hold of some 5.3 centers down here