Page 1 of 1
RANGE ROVER decals
Posted: Thu Jan 20, 2005 5:43 pm
by LincolnBlack
Hi all,
Looking to remove the R A N G E R O V E R decals from the front and rear of my truck, and put on some stainless laser-cut ones. Has anyone tried to remove these before? Is there a proven technique? Or just have go with a heat gun, scraper blade and some patience? The ones on the front look pretty crusty!
Linc
Posted: Fri Jan 21, 2005 9:19 am
by captain
I USED A FLAT SCEW DRIVER ON MINE THATS IT
Posted: Fri Jan 21, 2005 9:24 am
by LincolnBlack
And they come off pretty easily do they? What does the paint look like underneath?
Posted: Fri Jan 21, 2005 2:20 pm
by malibu9
You're on the right track, heat gun, hard plastic scraper and use some metho on them before hand to soften them up. Then once you have the outer skin off and there is the left over adhesive underneath use more metho or better still at this stage use eucalyptus oil to rub the rest of the glue off.
Hope this helps....
Posted: Fri Jan 21, 2005 8:22 pm
by Loanrangie
A hair dryer can work too, and you wont burn the paint.
Posted: Sat Jan 22, 2005 11:14 am
by GURU
weekend before xmas someone scratched off the top of the R and whole E and R with there finger and didn't scratch the paint (original paint is under the strickers) I wasn't happy as in now says Hang Over...my stickers were in really good nick to.
going to pull the stickers off and fit the plastic letters