Page 1 of 1
12mm front radius arm spacers
Posted: Thu Jan 20, 2005 9:11 pm
by 92mav
recently had a set of spacers made up to space the radius arms forward so my 35's wouldnt hit the bzck of the front guard. we made them 12mm thick. now my front diff pumpkin is hitting the panhard rod and the bracket there the radius arm mounts to the diff hits the top mount of the panhard rod on full compression. what gives!
Brad
Posted: Thu Jan 20, 2005 9:15 pm
by Bartso
is your front panhard adjustable or is standard as my front adjustable one has a slight curve in it i think or is it the rear that has a curve im not sure
Posted: Thu Jan 20, 2005 9:19 pm
by 92mav
my panhard is adjustable , straight except for the bend at the bottom what u want for the barn dors bartso
Posted: Fri Jan 21, 2005 6:24 am
by CRUSHU
also you may find your bumpstop wont meet up properly anymore either.
Posted: Fri Jan 21, 2005 6:37 am
by blkmav
I had the same problem with the 50mm lift, diff spaced and after market panhard rod. The nut was rubbing on the pumpkin.
I fixed it with a 75mm lift
