Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
OK I spoke to Andrew at Geelong Diffs today and 30 Detroits are virtually ready to go.
Mine gets installed first thing after easter These will fit all 8" Gen 1 V6's, Gen 2 3.0 V6 manuals and all Gen 2 & 3 3.5 V6's. There is still a question mark over Gen 2 3.0 V6 auto's as there is anecdotal evidence that they had a smaller front diff (7.5"). They will also fit V6 Tritons and Challengers but better to check with him.
If your interested call Andrew on 03 5278 1132.
v840 wrote:
[Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Rob the cost is the same as an ARB fitted.
I've still got some more things to do Ed but fully locked is the priority the front has to pull it's weight now :wink:
Where were you on sunday ? We did a hill that had yellow Lux twin locked with 33" MTR's written all over it Also Baz just updated to new 33" BFG's for the road and is looking for some 35"s for offroad (hasn't decided what yet) his rear ARB goes in this week.
Now you two can have a diesel Lux shootout
