Page 1 of 1
Charade Injectors
Posted: Mon Jan 24, 2005 12:33 pm
by lowndsie
Does anyone know if Charade Fuel inj. would fit the Feroza motor?
Posted: Mon Jan 24, 2005 5:15 pm
by rOd
Im guessing, yes.
But probably not the manifold, cause of the shape.
Posted: Tue Jan 25, 2005 9:04 am
by murcod
Lowndsie, are you trying to do a performance upgrade - or just looking for replacement injectors???
.
Posted: Tue Jan 25, 2005 9:31 am
by lowndsie
my injectors need a clean and a mate gave me some injectors from a charade. Thought it would be better to get them cleaned and then change them over myself.
It looks like i have to take out the engine to fix a leaky sump seal so i'll be doing heaps of work then.
Need also to replace engine and gearbox mounts. Thought it best to do everything whilst the engine is out.
Posted: Fri Jan 28, 2005 4:09 pm
by murcod
Unless the Charade injectors are the same flow rate you could end up with problems. The mixtures will be wrong and the oxy sensor's input may not be enough to correct them.
Posted: Sun Feb 27, 2005 5:55 am
by yossi_kl
Can you let me know if it is possible (perhaps with little adjustments) to plant a 2 litter gasoline engine with the original power train?