Page 1 of 1
Chaos4x4 Double arm
Posted: Mon Apr 14, 2003 11:11 pm
by CHAOS4X4
Gday,
I know there was some interest a while back so I thought i would let you know that we have finished testing the double arms and they are now for sale..
here's a pic
Posted: Mon Apr 14, 2003 11:14 pm
by hypo
looks good Lachlan. wot sort of $$ ??
Posted: Tue Apr 15, 2003 12:23 am
by CHAOS4X4
about $390 each
Posted: Tue Apr 15, 2003 7:17 am
by bj on roids
what tapers are the holes bored at?
Toyota has two different tapers, one for the drag link and one for the tie rod. One is larger and steeper, the other from memory is 5 degrees inclusive? ? ? also, Toyota changed the bore size, between different years. So does this arm directly bolt into any particular vehicle? Or is it for hiluxes :( (I have a landcruiser and I am curious)
Posted: Tue Apr 15, 2003 12:53 pm
by CHAOS4X4
Toyota have 3 diffrent tapers and we get the arms blank and drill the taper to suit the customers needs. You specify what balljoint you will be running at the top and bottom and we drill to suit.
If you have an older style landcruiser with drums then we do a special order for the smaller stud pattern on top of the swivel hub, but we reccommend you upgrade to discs and get the larger stud pattern swivel hub.
It is very much a custom made arm to suit the individuals application.
Posted: Wed Apr 16, 2003 9:19 am
by bj on roids
Thanks I have discs already, putting high steer on drum brakes is a recipe for disaster.
