Page 1 of 1
hilux 5 speed...which is better for convrsions... g or w ???
Posted: Mon Jan 24, 2005 9:28 pm
by dow50r
Quick question boys...a g 5 speed box out of a 4y lux...r these the ones that you would put a 5m in front of, or is the diesel box a better proposition??
Andrew
Posted: Tue Jan 25, 2005 6:13 pm
by jr9162
W56 is 50% stronger than the G52.
R151F is 100% stronger than the G52.
Can only connect the G52/W56 to a 5M-GE bellhousing. The R151F won't fit it.
The R151F will fit a 7M-GTE bellhousing but the input shaft is too short. Marks has an adapter to fit the R151F to a W58 bellhousing (5M-GE), adds about .60" in length to the driveline.
Posted: Tue Jan 25, 2005 8:08 pm
by dow50r
Awsome..thanks heaps..."Mate"
Bet its snowing out your way ATM!!
Andrew Oz
Posted: Tue Jan 25, 2005 8:14 pm
by MissDrew
Was told yesterday that the 5 speed behind a 2.8 has wider gears and bigger bear in it then a 5 speed from behind a 2.4.
Don`t know if its true or not but owell I have a 5 speed from a 2.8 anyway
Posted: Wed Jan 26, 2005 3:03 am
by jr9162
dow50r wrote:Awsome..thanks heaps..."Mate"
Bet its snowing out your way ATM!!
Andrew Oz
Supposed to get up to low 30s (degrees F) today.
Guts, if you look on the data tag on the center of your firewall, or in the door jam on your 'B' column, you'll find the transmission code. It'll be G52, G54, W56, R151F, or R150F.
Posted: Wed Jan 26, 2005 1:44 pm
by toyrex
Guts wrote:Was told yesterday that the 5 speed behind a 2.8 has wider gears and bigger bear in it then a 5 speed from behind a 2.4.
Don`t know if its true or not but owell I have a 5 speed from a 2.8 anyway
The G52 is the same gearbox on both petrol and diesel
If you want wider gears you want to use the R151 gearbox they are about 50% wider than the G52 gears
Adrian
Posted: Wed Jan 26, 2005 3:11 pm
by tomsoffroad
I had no problems with my w56 behind the Supra and I give it heaps of sh!t
Posted: Wed Jan 26, 2005 3:51 pm
by jr9162
tomsoffroad wrote:I had no problems with my w56 behind the Supra and I give it heaps of sh!t
5M-GE or 7M-GE? Did it fit without a body lift?
Posted: Wed Jan 26, 2005 7:32 pm
by tomsoffroad
jr9162
Posted: Wed Jan 26, 2005 3:51 pm
--------------------------------------------------------------------------------
tomsoffroad wrote:
I had no problems with my w56 behind the Supra and I give it heaps of sh!t
5M-GE or 7M-GE? Did it fit without a body lift?
1g-geu t/cam 2ltr 24valve. I had already done the b/lift prior to the engine swap. But it will fit without the b/lift on the beam axle surfs, you can sit the motor lower in the engine bay, IFS surfs need a b/lift to shut the bonnet