Page 1 of 1
GV Rim Specs ?????
Posted: Wed Jan 26, 2005 1:13 pm
by bigsteve
Trying to find Specs on these 16 inch GV rims.
What Back spacing
16X What??
All I know is they are Steel?? & 16 inch.
Anybody with a GV on these rims with a tape measure would be good.
Posted: Wed Jan 26, 2005 5:05 pm
by ljxtreem
what u up too????
Mock
Posted: Wed Jan 26, 2005 7:30 pm
by bigsteve
ljxtreem wrote:what u up too????
Mock
You coming out on Satuirdays night drive???
Or will you be at Steve G's on Saturday arvo?
Posted: Wed Jan 26, 2005 7:36 pm
by ljxtreem
ooooh, night drive sounds good
better fix that rear spring i just busted in doof, bagging it up at the lights
ahh 1ltr power he he he
Mock
Posted: Wed Jan 26, 2005 7:37 pm
by bigsteve
ljxtreem wrote:ooooh, night drive sounds good
better fix that rear spring i just busted in doof, bagging it up at the lights
ahh 1ltr power he he he
Mock
Might as well drop the second xfer out of critta as well
Posted: Wed Jan 26, 2005 8:01 pm
by ljxtreem
hmmm, might be a good idea : )
soor need to post a pic off critta
so i can post it somwhere else
Mock
Posted: Wed Jan 26, 2005 8:25 pm
by ljxtreem
didnt work
F#$%&kn crap
Posted: Wed Jan 26, 2005 8:32 pm
by cj
Mmmmmm, GV rims. If they don't work for you I might be interested
Steve, where are you getting rim flips in Melbourme for $40?
Posted: Wed Jan 26, 2005 8:33 pm
by cj
I think GV's 16x6.5 are 25P and 16x7 are 5P.
Posted: Wed Jan 26, 2005 11:19 pm
by Dozoor
The model before those where a 16x7 they should be stamped with the size , Not sure how you do the - + thing , but mine where about 25mm in the wrong direction from centre if i remember,
The problem you have should you want to do a centre shift ,is that most mobs won,t cut the centre out of these , the guys i tried in nsw couldn,t get the lathe tool to the welds , the shape in behind there is just to tight,
We had to remove the centre for them .Then the turned them down to size and recentered the thing at 2" i think , was 5 years ago ,
Wrked great with 285/85/16 , (35/11.50)