Page 1 of 1
Rubber Grommets
Posted: Thu Jan 27, 2005 4:24 pm
by DaveS3
Does anyone know where to get rubber grommets like these?
They must have an internal diameter of 3 1/4 inches.
To suit 3'' exhaust tube for a snorkel
Thanks
Dave
Posted: Thu Jan 27, 2005 4:29 pm
by GOT MUD
do you have CLARK RUBBER down that way if you do i would try them
Posted: Thu Jan 27, 2005 4:42 pm
by DaveS3
muduppig wrote:do you have CLARK RUBBER down that way if you do i would try them
Yeh, they were useless
Have also tried Purple pig & Auto Rubber Joint.
All sell grommets but only to about 20mm.
Purple pig can order but in lots of 100, so they would probably be stuck with 98.
Dave
Posted: Thu Jan 27, 2005 4:58 pm
by mlowe76
hi there
I have seen similar in electronics shops - maybe try jaycar electronics or similar
matt
Posted: Thu Jan 27, 2005 7:37 pm
by -Richo-
Picked up some gromets the other day from super cheap, but not sure if they have the size your after, give em a buzz.
Posted: Thu Jan 27, 2005 8:00 pm
by eliteforce32
have u tried ringing tjm or arb head offices? i no my safri snorkle has one so ask
Posted: Thu Jan 27, 2005 8:06 pm
by wanna
i got a rubber gromet simeler to that from the place i buy my truck part from
Posted: Thu Jan 27, 2005 8:09 pm
by MQ080
This thread is nothing without pics!
Posted: Thu Jan 27, 2005 9:07 pm
by 360 scout
dave ,
you can buy an edging strip electricians use it, you just buy it in a long strip cut to lenth press it around the edge & hey presto instant grommet any size you want!
Posted: Thu Jan 27, 2005 9:21 pm
by up2nogood
Repco.
These are used extensively in vehicle wiring.
Also try auto electricians.
Posted: Fri Jan 28, 2005 10:03 pm
by GRINCH
i tried almost every were trying to find some ended up getting some u shaped edgeing & super glued the joint, can't tell the difference