Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

where to get shackle bolts in melbourne?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

where to get shackle bolts in melbourne?

Post by bad_religion_au »

building a new set of shackles and need the shackle bolts, greasable or not, really doesn't bother me. i know you can get them, cause the booty fab shackles i pulled from it have them (but the bushings were in so tight i had to bugger the thread to get it out.

it's for a 40 series if it matters.
Spit my last breath
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Toyota, ARB (greasable shackles)

Bazzle
Top
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

Contact:
Contact Nev62

Post by Nev62 »

I think Ironman suspension in Clayton sell them. Got greaseable ones for the Radier there and if they have stuff for my 4b, then yours should not be a problem :D
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

toyota told me only full shackles were available (this isn't going to be a stock setup)
Spit my last breath
Top
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

Contact:
Contact Nev62

Post by Nev62 »

bad_religion_au wrote:toyota told me only full shackles were available (this isn't going to be a stock setup)


Ford told me the same about the Raider :? I think I paid $30 (included freight to my door in sydney overnight) from Ironman Suspension for the front set and a tad more for the rear set.

Just checked the Ironman website and yep they sell greasable shackles for just about anything including the 40 both pre 1980 and post 1980
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
Top
Posts: 189
Joined: Wed Sep 08, 2004 8:27 pm
Location: GYMPIE QLD

Post by rock hopper »

i make longer shackles and could sell u the bolts or full shackles.\
i make greasable bolts.
what year - model ? is your cruiser .
as the pin size changed in 8/80 >.

the shackles i make are 50mm longer than std . i can make longer .
You do not have the required permissions to view the files attached to this post.
L.C. AUTOMOTIVE PH:0754827077
4x4 PARTS + ACCESSORIES
TYRE WHEELS & RADIATORS - A/C
1 DuRIETZ COURT GYMPIE 4570
Top
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

don kyatt in west melb
Top
Posts: 860
Joined: Mon Aug 02, 2004 3:11 pm
Location: AUS

Post by scotto »

rock hopper wrote:i make longer shackles and could sell u the bolts or full shackles.\
i make greasable bolts.
what year - model ? is your cruiser .
as the pin size changed in 8/80 >.

the shackles i make are 50mm longer than std . i can make longer .


Can we see the rest of this please :D

Ad - Carrolls Springs - north (past Coburg they're on Sydney Road) they make them, less mark up ;)
www.3rdrock4x4.com
Top
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

Any Bolt Shop. - I.e Cost Less Bolts - in ringwood.

Hi Tensile with lock washers.

Dave
Land Rover Discovery - GQ conversion underway
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

mule75 wrote:don kyatt in west melb


thanks again, i did get your SMS.

don't need them anymore for this truck, ended up fixing the threads, but may need some for a 1980 troopy one day soon.
Spit my last breath
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 6 guests